Before you begin the laying process, you must select the desired tile. For the area near the house, through which transport sometimes passes, it is better to give preference to a large plain tile. For lining small garden paths, small tiles of various colors are suitable. A flat section of future tracks must be marked with stakes. When leveling it, which is done with a shovel, removing uneven areas of the earth, it is necessary to take into account the slope of the track, for a stack of water. After that, the surface must be tamped, preparing it for the installation of borders. By the way, now almost everywhere a modern estate requires that the path be made of expensive tiles.
Borders form a niche and are installed along the entire length of the future track. A sand-cement mixture for a pillow is poured into the resulting niche. Next, the pillow is compacted and compacted. After that, you can proceed directly to laying the tiles, which must be done diagonally from top to bottom. Using a mallet, carefully place the tiles in place. In order for the surface to turn out to be even, you need to use the building level. After the entire tile is laid, it must be compacted with a vibrating plate or rammer. The resulting seams between the tiles are covered with sand.