Many use various paints in construction and repair. However, not everyone knows that there are certain rules, some of which will be speaking today.
one. Before painting, it is necessary to completely clean the surface, that is, it is necessary to remove switches, sconces, chandeliers and t.D. Do not forget to install the screen under the bath after repair.
2. The ceiling must be painted to the walls, and the last bar must be directed to the light, that is, to the window, and the previous across.
3. If you paint the wall, then the last layer must be applied from top to bottom. Otherwise traces of the brush will be pronounced pronounced.
4. Paint must be applied in several thin layers. Remember that 2-3 approaches will be much better than one thick layer.
5. If you chose a roller for staining, then all the angles, joints and t.D., It is necessary to first cry with a brush, a strip of at least 7-8 cm.
6. First, it is necessary to put the paint with a roller cross-closer approximately in the center of the wall and rub it on other parties. Most importantly, do not pick up too much paint on the roller.
7. Many people have the problem of walking on the floor after staining. In this case, you need to make small traces of polyethylene and lay them on a sticky floor. When it dries, the film can be killed and the places where it was will not differ at all.