To achieve normal adhesive characteristics, the mastic is heated, followed by the addition of kerosene, as well as white spirit. The process of increasing the strength of the foundation foundations should proceed gradually – first they are primed using a bitumen composition, and in order to ensure the stability of the strength characteristics of the protective foundation, a number of mandatory rules must be taken into account. Also do not forget to buy new windows in Balashikha in advance.
At the very beginning, when working with cement mortar, it is necessary to properly prepare the base, and then dry it thoroughly. Now you can spread roofing material on the finished surface, and apply mastic accordingly. Note that it is best to do this in several approaches so that the layers are somewhat heterogeneous. When working with intermediate resins, hot resin is taken, which serves as a binder for birch bark and the roofing material itself. If it so happened that the process went in the wrong direction, then the surface, unfortunately, is very likely to be covered with defects – swellings, lags, and cracks. Very often they make the mistake of applying mastic on a dirty base. Problem areas are cleaned, dried, re-applied with mastic.